Ultrasound Research Today is a free monthly online journal that collates and summarizes the latest research about Ultrasound, including details on screening, diagnosis, pregnancy, detection.

Effects of ultrasonic irradiation on the properties of coatings obtained by electroless plating and electro plating.

Touyeras F, Hihn JY, Bourgoin X, Jacques B, Hallez L, Branger V

Laboratoire de Chimie des Matériaux et Interfaces, Université de Franche-Comté, 25030 Besançon Cedex, France. francis.touyeras@univ-fcomte.fr

This paper deals with the effects of ultrasonic irradiation on electroless copper coating i.e. metallic deposition on non-conductive substrates and on electroplating on metallic substrates. Ultrasonic irradiation was both applied during activation (surface preparation for the electroless coating) and during plating steps in both cases. Several parameters were monitored, such as plating rates, practical adhesion, hardness, internal stress versus varying acoustic powers and frequencies. Optimum conditions for irradiation time, frequency and power were determined for each step. It appears clearly that ultrasound use affects deposit properties. Then, changes in the coating mechanisms can be discussed, and several parameters will be explored in this paper, to explain enhancement of deposit properties: increase in catalyst specific area, stirring dependence, surface energy evolution, dihydrogen desorption, structure of coating.

Published 11 October 2004 in Ultrason Sonochem, 12(1): 13-9.
Full-text of this article is available online (may require subscription).

© 2004-2008 Ultrasound Research Today. All Rights Reserved.